San Saba County is in IECC Climate Zone 3A (Warm - Humid). Get accurate Manual J load calculations with official ASHRAE design temperatures for San Saba County.
San Saba County, Texas is classified under IECC Climate Zone 3A (Warm - Humid), a mixed-climate region with humid moisture conditions. With 4 ZIP codes and 1 communities, every HVAC installation in San Saba County must use the ASHRAE design temperatures of 22°F (99% winter heating) and 101°F (1% summer cooling) for accurate Manual J load calculations.
With balanced heating and cooling loads, San Saba County homes require well-rounded insulation — R-20 walls, R-30 ceilings, R-19 floors — and windows with both U-factor 0.32 and SHGC 0.25 to handle both winter lows and summer highs.
Minimum insulation R-values and window performance for Climate Zone 3A in San Saba County, TX.
| Building Component | Minimum Requirement | Unit |
|---|---|---|
| Ceiling / Attic Insulation | R-30 | R-value |
| Wall Insulation | R-20 | R-value |
| Floor Insulation | R-19 | R-value |
| Window U-Factor | 0.32 | BTU/hr-ft²-°F |
| Window SHGC | 0.25 | Coefficient |
| Air Infiltration | 0.15 | ACH50 |
Climate Zone 3A requires precise load calculations. Upload your San Saba County blueprint and get a professional Manual J report in 60 seconds— first report is FREE. Pre-loaded with San Saba County's exact design temperatures (22°F winter / 101°F summer).
Enter your ZIP code to confirm it's in San Saba County and get climate zone details.
Official ASHRAE design temperatures for San Saba County, TX, used for accurate Manual J load calculations.
Minimum insulation and window requirements for San Saba County per IECC 2021 energy code.
Climate Zone 3A: Warm - Humid - Mixed climate with warm, humid summers and cool winters. Balanced heating and cooling needs.
1 cities and communities in San Saba County share Climate Zone 3A requirements.
Compare climate zones with other counties in Texas. Different zones require different HVAC equipment sizing.
Upload your San Saba County blueprint and get a professional Manual J load calculation using official Zone 3A design temperatures. First report is FREE.
Join 10,000+ Texas contractors who trust AutoHVAC