Piute County is in IECC Climate Zone 5B (Cool - Dry). Get accurate Manual J load calculations with official ASHRAE design temperatures for Piute County.
Piute County, Utah is classified under IECC Climate Zone 5B (Cool - Dry), a heating-dominated region with dry moisture conditions. With 5 ZIP codes and 1 communities, every HVAC installation in Piute County must use the ASHRAE design temperatures of 5°F (99% winter heating) and 91°F (1% summer cooling) for accurate Manual J load calculations.
As a heating-dominated zone, Piute County requires robust insulation — a minimum of R-20 in walls, R-49 in ceilings, and R-30 in floors. Windows must meet a U-factor of 0.3 or lower. These requirements ensure homes maintain comfort during the coldest 5°F design conditions.
Minimum insulation R-values and window performance for Climate Zone 5B in Piute County, UT.
| Building Component | Minimum Requirement | Unit |
|---|---|---|
| Ceiling / Attic Insulation | R-49 | R-value |
| Wall Insulation | R-20 | R-value |
| Floor Insulation | R-30 | R-value |
| Window U-Factor | 0.3 | BTU/hr-ft²-°F |
| Window SHGC | 0.4 | Coefficient |
| Air Infiltration | 0.15 | ACH50 |
Climate Zone 5B requires precise load calculations. Upload your Piute County blueprint and get a professional Manual J report in 60 seconds— first report is FREE. Pre-loaded with Piute County's exact design temperatures (5°F winter / 91°F summer).
Enter your ZIP code to confirm it's in Piute County and get climate zone details.
Official ASHRAE design temperatures for Piute County, UT, used for accurate Manual J load calculations.
Minimum insulation and window requirements for Piute County per IECC 2021 energy code.
Climate Zone 5B: Cool - Dry - Heating-dominated with cold, dry winters and warm summers. High heating loads in winter, moderate cooling needs.
1 cities and communities in Piute County share Climate Zone 5B requirements.
Compare climate zones with other counties in Utah. Different zones require different HVAC equipment sizing.
Upload your Piute County blueprint and get a professional Manual J load calculation using official Zone 5B design temperatures. First report is FREE.
Join 10,000+ Utah contractors who trust AutoHVAC