Duchesne County is in IECC Climate Zone 6B (Cold - Dry). Get accurate Manual J load calculations with official ASHRAE design temperatures for Duchesne County.
Duchesne County, Utah is classified under IECC Climate Zone 6B (Cold - Dry), a heating-dominated region with dry moisture conditions. With 12 ZIP codes and 1 communities, every HVAC installation in Duchesne County must use the ASHRAE design temperatures of 3°F (99% winter heating) and 91°F (1% summer cooling) for accurate Manual J load calculations.
As a heating-dominated zone, Duchesne County requires robust insulation — a minimum of R-20 in walls, R-49 in ceilings, and R-30 in floors. Windows must meet a U-factor of 0.3 or lower. These requirements ensure homes maintain comfort during the coldest 3°F design conditions.
Minimum insulation R-values and window performance for Climate Zone 6B in Duchesne County, UT.
| Building Component | Minimum Requirement | Unit |
|---|---|---|
| Ceiling / Attic Insulation | R-49 | R-value |
| Wall Insulation | R-20 | R-value |
| Floor Insulation | R-30 | R-value |
| Window U-Factor | 0.3 | BTU/hr-ft²-°F |
| Window SHGC | 0.4 | Coefficient |
| Air Infiltration | 0.15 | ACH50 |
Climate Zone 6B requires precise load calculations. Upload your Duchesne County blueprint and get a professional Manual J report in 60 seconds— first report is FREE. Pre-loaded with Duchesne County's exact design temperatures (3°F winter / 91°F summer).
Enter your ZIP code to confirm it's in Duchesne County and get climate zone details.
Official ASHRAE design temperatures for Duchesne County, UT, used for accurate Manual J load calculations.
Minimum insulation and window requirements for Duchesne County per IECC 2021 energy code.
Climate Zone 6B: Cold - Dry - Cold, dry climate with very cold winters and mild summers. Extreme heating requirements, minimal cooling.
1 cities and communities in Duchesne County share Climate Zone 6B requirements.
Compare climate zones with other counties in Utah. Different zones require different HVAC equipment sizing.
Upload your Duchesne County blueprint and get a professional Manual J load calculation using official Zone 6B design temperatures. First report is FREE.
Join 10,000+ Utah contractors who trust AutoHVAC