Paulding County is in IECC Climate Zone 3A (Warm - Humid). Get accurate Manual J load calculations with official ASHRAE design temperatures for Paulding County.
Paulding County, Georgia is classified under IECC Climate Zone 3A (Warm - Humid), a mixed-climate region with humid moisture conditions. With 3 ZIP codes and 1 communities, every HVAC installation in Paulding County must use the ASHRAE design temperatures of 22°F (99% winter heating) and 94°F (1% summer cooling) for accurate Manual J load calculations.
With balanced heating and cooling loads, Paulding County homes require well-rounded insulation — R-20 walls, R-30 ceilings, R-19 floors — and windows with both U-factor 0.32 and SHGC 0.25 to handle both winter lows and summer highs.
Minimum insulation R-values and window performance for Climate Zone 3A in Paulding County, GA.
| Building Component | Minimum Requirement | Unit |
|---|---|---|
| Ceiling / Attic Insulation | R-30 | R-value |
| Wall Insulation | R-20 | R-value |
| Floor Insulation | R-19 | R-value |
| Window U-Factor | 0.32 | BTU/hr-ft²-°F |
| Window SHGC | 0.25 | Coefficient |
| Air Infiltration | 0.15 | ACH50 |
Climate Zone 3A requires precise load calculations. Upload your Paulding County blueprint and get a professional Manual J report in 60 seconds— first report is FREE. Pre-loaded with Paulding County's exact design temperatures (22°F winter / 94°F summer).
Enter your ZIP code to confirm it's in Paulding County and get climate zone details.
Official ASHRAE design temperatures for Paulding County, GA, used for accurate Manual J load calculations.
Minimum insulation and window requirements for Paulding County per IECC 2021 energy code.
Climate Zone 3A: Warm - Humid - Mixed climate with warm, humid summers and cool winters. Balanced heating and cooling needs.
1 cities and communities in Paulding County share Climate Zone 3A requirements.
Compare climate zones with other counties in Georgia. Different zones require different HVAC equipment sizing.
Upload your Paulding County blueprint and get a professional Manual J load calculation using official Zone 3A design temperatures. First report is FREE.
Join 10,000+ Georgia contractors who trust AutoHVAC