Eugene is in IECC Climate Zone 4C (Mixed - Marine). Get accurate Manual J load calculations with official design temperatures for Eugene.
Eugene, Oregon falls within IECC Climate Zone 4C (Mixed - Marine), a mixed-climate region with marine moisture conditions. HVAC contractors working in Eugene must use the official ASHRAE design temperatures of 29°F (99% winter) and 85°F (1% summer) when performing Manual J load calculations. These values represent the outdoor conditions your heating and cooling system must handle 99% and 1% of the year, respectively — ensuring proper equipment sizing without costly over- or under-sizing.
Zone 4C experiences both significant heating and cooling loads. Eugene homes need balanced insulation — R-20 walls, R-49 ceilings — plus windows with U-factor 0.32 and SHGC 0.4 per the IECC 2021 energy code.
Minimum insulation R-values and window performance requirements for Climate Zone 4C in Eugene, Oregon.
| Building Component | Minimum Requirement | Unit |
|---|---|---|
| Ceiling / Attic Insulation | R-49 | R-value |
| Wall Insulation | R-20 | R-value |
| Floor Insulation | R-19 | R-value |
| Window U-Factor | 0.32 | BTU/hr-ft²-°F |
| Window SHGC | 0.4 | Coefficient |
| Air Infiltration | 0.15 | ACH50 |
Climate Zone 4C requires precise load calculations. Upload your Eugene blueprint and get a professional Manual J report in 60 seconds— first report is FREE. Pre-loaded with Eugene's exact design temperatures (29°F winter / 85°F summer).
Enter your ZIP code to confirm it's in Eugene and get climate zone details.
Official ASHRAE design temperatures for Eugene, used for accurate Manual J load calculations.
Minimum insulation and window requirements for Eugene per IECC 2021.
Energy Code: 2021 IECC
Upload your Eugene blueprint and get a professional Manual J load calculation using official Zone 4C design temperatures. First report is FREE.
Join 10,000+ Eugene contractors who trust AutoHVAC