Seward County is in IECC Climate Zone 5A (Cool - Humid). Get accurate Manual J load calculations with official ASHRAE design temperatures for Seward County.
Seward County, Nebraska is classified under IECC Climate Zone 5A (Cool - Humid), a heating-dominated region with humid moisture conditions. With 10 ZIP codes and 1 communities, every HVAC installation in Seward County must use the ASHRAE design temperatures of 0°F (99% winter heating) and 94°F (1% summer cooling) for accurate Manual J load calculations.
As a heating-dominated zone, Seward County requires robust insulation — a minimum of R-20 in walls, R-49 in ceilings, and R-30 in floors. Windows must meet a U-factor of 0.3 or lower. These requirements ensure homes maintain comfort during the coldest 0°F design conditions.
Minimum insulation R-values and window performance for Climate Zone 5A in Seward County, NE.
| Building Component | Minimum Requirement | Unit |
|---|---|---|
| Ceiling / Attic Insulation | R-49 | R-value |
| Wall Insulation | R-20 | R-value |
| Floor Insulation | R-30 | R-value |
| Window U-Factor | 0.3 | BTU/hr-ft²-°F |
| Window SHGC | 0.4 | Coefficient |
| Air Infiltration | 0.15 | ACH50 |
Climate Zone 5A requires precise load calculations. Upload your Seward County blueprint and get a professional Manual J report in 60 seconds— first report is FREE. Pre-loaded with Seward County's exact design temperatures (0°F winter / 94°F summer).
Enter your ZIP code to confirm it's in Seward County and get climate zone details.
Official ASHRAE design temperatures for Seward County, NE, used for accurate Manual J load calculations.
Minimum insulation and window requirements for Seward County per IECC 2021 energy code.
Climate Zone 5A: Cool - Humid - Heating-dominated climate with cold winters and warm, humid summers. High heating loads, moderate cooling needs.
1 cities and communities in Seward County share Climate Zone 5A requirements.
Compare climate zones with other counties in Nebraska. Different zones require different HVAC equipment sizing.
Upload your Seward County blueprint and get a professional Manual J load calculation using official Zone 5A design temperatures. First report is FREE.
Join 10,000+ Nebraska contractors who trust AutoHVAC