Sedgwick County is in IECC Climate Zone 4A (Mixed - Humid). Get accurate Manual J load calculations with official ASHRAE design temperatures for Sedgwick County.
Sedgwick County, Kansas is classified under IECC Climate Zone 4A (Mixed - Humid), a mixed-climate region with humid moisture conditions. With 49 ZIP codes and 1 communities, every HVAC installation in Sedgwick County must use the ASHRAE design temperatures of 7°F (99% winter heating) and 99°F (1% summer cooling) for accurate Manual J load calculations.
With balanced heating and cooling loads, Sedgwick County homes require well-rounded insulation — R-20 walls, R-49 ceilings, R-19 floors — and windows with both U-factor 0.32 and SHGC 0.4 to handle both winter lows and summer highs.
Minimum insulation R-values and window performance for Climate Zone 4A in Sedgwick County, KS.
| Building Component | Minimum Requirement | Unit |
|---|---|---|
| Ceiling / Attic Insulation | R-49 | R-value |
| Wall Insulation | R-20 | R-value |
| Floor Insulation | R-19 | R-value |
| Window U-Factor | 0.32 | BTU/hr-ft²-°F |
| Window SHGC | 0.4 | Coefficient |
| Air Infiltration | 0.15 | ACH50 |
Climate Zone 4A requires precise load calculations. Upload your Sedgwick County blueprint and get a professional Manual J report in 60 seconds— first report is FREE. Pre-loaded with Sedgwick County's exact design temperatures (7°F winter / 99°F summer).
Enter your ZIP code to confirm it's in Sedgwick County and get climate zone details.
Official ASHRAE design temperatures for Sedgwick County, KS, used for accurate Manual J load calculations.
Minimum insulation and window requirements for Sedgwick County per IECC 2021 energy code.
Climate Zone 4A: Mixed - Humid - True mixed climate with hot, humid summers and cold winters. Equal emphasis on heating and cooling.
1 cities and communities in Sedgwick County share Climate Zone 4A requirements.
Compare climate zones with other counties in Kansas. Different zones require different HVAC equipment sizing.
Upload your Sedgwick County blueprint and get a professional Manual J load calculation using official Zone 4A design temperatures. First report is FREE.
Join 10,000+ Kansas contractors who trust AutoHVAC