Mendocino County is in IECC Climate Zone 3C (Warm - Marine). Get accurate Manual J load calculations with official ASHRAE design temperatures for Mendocino County.
Mendocino County, California is classified under IECC Climate Zone 3C (Warm - Marine), a mixed-climate region with marine moisture conditions. With 28 ZIP codes and 1 communities, every HVAC installation in Mendocino County must use the ASHRAE design temperatures of 26°F (99% winter heating) and 101°F (1% summer cooling) for accurate Manual J load calculations.
With balanced heating and cooling loads, Mendocino County homes require well-rounded insulation — R-20 walls, R-30 ceilings, R-19 floors — and windows with both U-factor 0.32 and SHGC 0.4 to handle both winter lows and summer highs.
Minimum insulation R-values and window performance for Climate Zone 3C in Mendocino County, CA.
| Building Component | Minimum Requirement | Unit |
|---|---|---|
| Ceiling / Attic Insulation | R-30 | R-value |
| Wall Insulation | R-20 | R-value |
| Floor Insulation | R-19 | R-value |
| Window U-Factor | 0.32 | BTU/hr-ft²-°F |
| Window SHGC | 0.4 | Coefficient |
| Air Infiltration | 0.15 | ACH50 |
Climate Zone 3C requires precise load calculations. Upload your Mendocino County blueprint and get a professional Manual J report in 60 seconds— first report is FREE. Pre-loaded with Mendocino County's exact design temperatures (26°F winter / 101°F summer).
Enter your ZIP code to confirm it's in Mendocino County and get climate zone details.
Official ASHRAE design temperatures for Mendocino County, CA, used for accurate Manual J load calculations.
Minimum insulation and window requirements for Mendocino County per IECC 2021 energy code.
Climate Zone 3C: Warm - Marine - Mild, marine climate with cool summers and mild winters. Moderate heating needs, minimal cooling.
1 cities and communities in Mendocino County share Climate Zone 3C requirements.
Compare climate zones with other counties in California. Different zones require different HVAC equipment sizing.
Upload your Mendocino County blueprint and get a professional Manual J load calculation using official Zone 3C design temperatures. First report is FREE.
Join 10,000+ California contractors who trust AutoHVAC