Knox County is in IECC Climate Zone 6A (Cold - Humid). Get accurate Manual J load calculations with official ASHRAE design temperatures for Knox County.
Knox County, Maine is classified under IECC Climate Zone 6A (Cold - Humid), a heating-dominated region with humid moisture conditions. With 21 ZIP codes and 1 communities, every HVAC installation in Knox County must use the ASHRAE design temperatures of 1°F (99% winter heating) and 83°F (1% summer cooling) for accurate Manual J load calculations.
As a heating-dominated zone, Knox County requires robust insulation — a minimum of R-20 in walls, R-49 in ceilings, and R-30 in floors. Windows must meet a U-factor of 0.3 or lower. These requirements ensure homes maintain comfort during the coldest 1°F design conditions.
Minimum insulation R-values and window performance for Climate Zone 6A in Knox County, ME.
| Building Component | Minimum Requirement | Unit |
|---|---|---|
| Ceiling / Attic Insulation | R-49 | R-value |
| Wall Insulation | R-20 | R-value |
| Floor Insulation | R-30 | R-value |
| Window U-Factor | 0.3 | BTU/hr-ft²-°F |
| Window SHGC | 0.4 | Coefficient |
| Air Infiltration | 0.15 | ACH50 |
Climate Zone 6A requires precise load calculations. Upload your Knox County blueprint and get a professional Manual J report in 60 seconds— first report is FREE. Pre-loaded with Knox County's exact design temperatures (1°F winter / 83°F summer).
Enter your ZIP code to confirm it's in Knox County and get climate zone details.
Official ASHRAE design temperatures for Knox County, ME, used for accurate Manual J load calculations.
Minimum insulation and window requirements for Knox County per IECC 2021 energy code.
Climate Zone 6A: Cold - Humid - Cold climate with very cold winters and warm summers. Very high heating loads, moderate cooling needs.
1 cities and communities in Knox County share Climate Zone 6A requirements.
Compare climate zones with other counties in Maine. Different zones require different HVAC equipment sizing.
Upload your Knox County blueprint and get a professional Manual J load calculation using official Zone 6A design temperatures. First report is FREE.
Join 10,000+ Maine contractors who trust AutoHVAC