Guthrie County is in IECC Climate Zone 5A (Cool - Humid). Get accurate Manual J load calculations with official ASHRAE design temperatures for Guthrie County.
Guthrie County, Iowa is classified under IECC Climate Zone 5A (Cool - Humid), a heating-dominated region with humid moisture conditions. With 9 ZIP codes and 1 communities, every HVAC installation in Guthrie County must use the ASHRAE design temperatures of -2°F (99% winter heating) and 91°F (1% summer cooling) for accurate Manual J load calculations.
As a heating-dominated zone, Guthrie County requires robust insulation — a minimum of R-20 in walls, R-49 in ceilings, and R-30 in floors. Windows must meet a U-factor of 0.3 or lower. These requirements ensure homes maintain comfort during the coldest -2°F design conditions.
Minimum insulation R-values and window performance for Climate Zone 5A in Guthrie County, IA.
| Building Component | Minimum Requirement | Unit |
|---|---|---|
| Ceiling / Attic Insulation | R-49 | R-value |
| Wall Insulation | R-20 | R-value |
| Floor Insulation | R-30 | R-value |
| Window U-Factor | 0.3 | BTU/hr-ft²-°F |
| Window SHGC | 0.4 | Coefficient |
| Air Infiltration | 0.15 | ACH50 |
Climate Zone 5A requires precise load calculations. Upload your Guthrie County blueprint and get a professional Manual J report in 60 seconds— first report is FREE. Pre-loaded with Guthrie County's exact design temperatures (-2°F winter / 91°F summer).
Enter your ZIP code to confirm it's in Guthrie County and get climate zone details.
Official ASHRAE design temperatures for Guthrie County, IA, used for accurate Manual J load calculations.
Minimum insulation and window requirements for Guthrie County per IECC 2021 energy code.
Climate Zone 5A: Cool - Humid - Heating-dominated climate with cold winters and warm, humid summers. High heating loads, moderate cooling needs.
1 cities and communities in Guthrie County share Climate Zone 5A requirements.
Compare climate zones with other counties in Iowa. Different zones require different HVAC equipment sizing.
Upload your Guthrie County blueprint and get a professional Manual J load calculation using official Zone 5A design temperatures. First report is FREE.
Join 10,000+ Iowa contractors who trust AutoHVAC