Cochran County is in IECC Climate Zone 4B (Mixed - Dry). Get accurate Manual J load calculations with official ASHRAE design temperatures for Cochran County.
Cochran County, Texas is classified under IECC Climate Zone 4B (Mixed - Dry), a mixed-climate region with dry moisture conditions. With 3 ZIP codes and 1 communities, every HVAC installation in Cochran County must use the ASHRAE design temperatures of 15°F (99% winter heating) and 97°F (1% summer cooling) for accurate Manual J load calculations.
With balanced heating and cooling loads, Cochran County homes require well-rounded insulation — R-20 walls, R-49 ceilings, R-19 floors — and windows with both U-factor 0.32 and SHGC 0.4 to handle both winter lows and summer highs.
Minimum insulation R-values and window performance for Climate Zone 4B in Cochran County, TX.
| Building Component | Minimum Requirement | Unit |
|---|---|---|
| Ceiling / Attic Insulation | R-49 | R-value |
| Wall Insulation | R-20 | R-value |
| Floor Insulation | R-19 | R-value |
| Window U-Factor | 0.32 | BTU/hr-ft²-°F |
| Window SHGC | 0.4 | Coefficient |
| Air Infiltration | 0.15 | ACH50 |
Climate Zone 4B requires precise load calculations. Upload your Cochran County blueprint and get a professional Manual J report in 60 seconds— first report is FREE. Pre-loaded with Cochran County's exact design temperatures (15°F winter / 97°F summer).
Enter your ZIP code to confirm it's in Cochran County and get climate zone details.
Official ASHRAE design temperatures for Cochran County, TX, used for accurate Manual J load calculations.
Minimum insulation and window requirements for Cochran County per IECC 2021 energy code.
Climate Zone 4B: Mixed - Dry - Mixed climate with low humidity, warm summers and cold winters. Significant heating and cooling needs.
1 cities and communities in Cochran County share Climate Zone 4B requirements.
Compare climate zones with other counties in Texas. Different zones require different HVAC equipment sizing.
Upload your Cochran County blueprint and get a professional Manual J load calculation using official Zone 4B design temperatures. First report is FREE.
Join 10,000+ Texas contractors who trust AutoHVAC