Cassia County is in IECC Climate Zone 5B (Cool - Dry). Get accurate Manual J load calculations with official ASHRAE design temperatures for Cassia County.
Cassia County, Idaho is classified under IECC Climate Zone 5B (Cool - Dry), a heating-dominated region with dry moisture conditions. With 6 ZIP codes and 1 communities, every HVAC installation in Cassia County must use the ASHRAE design temperatures of 6°F (99% winter heating) and 91°F (1% summer cooling) for accurate Manual J load calculations.
As a heating-dominated zone, Cassia County requires robust insulation — a minimum of R-20 in walls, R-49 in ceilings, and R-30 in floors. Windows must meet a U-factor of 0.3 or lower. These requirements ensure homes maintain comfort during the coldest 6°F design conditions.
Minimum insulation R-values and window performance for Climate Zone 5B in Cassia County, ID.
| Building Component | Minimum Requirement | Unit |
|---|---|---|
| Ceiling / Attic Insulation | R-49 | R-value |
| Wall Insulation | R-20 | R-value |
| Floor Insulation | R-30 | R-value |
| Window U-Factor | 0.3 | BTU/hr-ft²-°F |
| Window SHGC | 0.4 | Coefficient |
| Air Infiltration | 0.15 | ACH50 |
Climate Zone 5B requires precise load calculations. Upload your Cassia County blueprint and get a professional Manual J report in 60 seconds— first report is FREE. Pre-loaded with Cassia County's exact design temperatures (6°F winter / 91°F summer).
Enter your ZIP code to confirm it's in Cassia County and get climate zone details.
Official ASHRAE design temperatures for Cassia County, ID, used for accurate Manual J load calculations.
Minimum insulation and window requirements for Cassia County per IECC 2021 energy code.
Climate Zone 5B: Cool - Dry - Heating-dominated with cold, dry winters and warm summers. High heating loads in winter, moderate cooling needs.
1 cities and communities in Cassia County share Climate Zone 5B requirements.
Compare climate zones with other counties in Idaho. Different zones require different HVAC equipment sizing.
Upload your Cassia County blueprint and get a professional Manual J load calculation using official Zone 5B design temperatures. First report is FREE.
Join 10,000+ Idaho contractors who trust AutoHVAC