Broward County is in IECC Climate Zone 1A (Very Hot - Humid). Get accurate Manual J load calculations with official ASHRAE design temperatures for Broward County.
Broward County, Florida is classified under IECC Climate Zone 1A (Very Hot - Humid), a cooling-dominated region with humid moisture conditions. With 88 ZIP codes and 1 communities, every HVAC installation in Broward County must use the ASHRAE design temperatures of 44°F (99% winter heating) and 92°F (1% summer cooling) for accurate Manual J load calculations.
As a cooling-dominated zone, controlling solar heat gain is essential in Broward County. Windows must have an SHGC of 0.25 or lower, along with R-13 wall and R-30 ceiling insulation. Proper sizing prevents oversized AC systems that short-cycle and waste energy.
Minimum insulation R-values and window performance for Climate Zone 1A in Broward County, FL.
| Building Component | Minimum Requirement | Unit |
|---|---|---|
| Ceiling / Attic Insulation | R-30 | R-value |
| Wall Insulation | R-13 | R-value |
| Floor Insulation | R-13 | R-value |
| Window U-Factor | 0.4 | BTU/hr-ft²-°F |
| Window SHGC | 0.25 | Coefficient |
| Air Infiltration | 0.25 | ACH50 |
Climate Zone 1A requires precise load calculations. Upload your Broward County blueprint and get a professional Manual J report in 60 seconds— first report is FREE. Pre-loaded with Broward County's exact design temperatures (44°F winter / 92°F summer).
Enter your ZIP code to confirm it's in Broward County and get climate zone details.
Official ASHRAE design temperatures for Broward County, FL, used for accurate Manual J load calculations.
Minimum insulation and window requirements for Broward County per IECC 2021 energy code.
Climate Zone 1A: Very Hot - Humid - Cooling-dominated climate with extreme heat and high humidity year-round. Minimal heating requirements.
1 cities and communities in Broward County share Climate Zone 1A requirements.
Compare climate zones with other counties in Florida. Different zones require different HVAC equipment sizing.
Upload your Broward County blueprint and get a professional Manual J load calculation using official Zone 1A design temperatures. First report is FREE.
Join 10,000+ Florida contractors who trust AutoHVAC