Beltrami County is in IECC Climate Zone 7 (Very Cold). Get accurate Manual J load calculations with official ASHRAE design temperatures for Beltrami County.
Beltrami County, Minnesota is classified under IECC Climate Zone 7 (Very Cold), a heating-dominated region with moist moisture conditions. With 14 ZIP codes and 1 communities, every HVAC installation in Beltrami County must use the ASHRAE design temperatures of -18°F (99% winter heating) and 84°F (1% summer cooling) for accurate Manual J load calculations.
As a heating-dominated zone, Beltrami County requires robust insulation — a minimum of R-20 in walls, R-60 in ceilings, and R-38 in floors. Windows must meet a U-factor of 0.3 or lower. These requirements ensure homes maintain comfort during the coldest -18°F design conditions.
Minimum insulation R-values and window performance for Climate Zone 7 in Beltrami County, MN.
| Building Component | Minimum Requirement | Unit |
|---|---|---|
| Ceiling / Attic Insulation | R-60 | R-value |
| Wall Insulation | R-20 | R-value |
| Floor Insulation | R-38 | R-value |
| Window U-Factor | 0.3 | BTU/hr-ft²-°F |
| Window SHGC | 0.45 | Coefficient |
| Air Infiltration | 0.15 | ACH50 |
Climate Zone 7 requires precise load calculations. Upload your Beltrami County blueprint and get a professional Manual J report in 60 seconds— first report is FREE. Pre-loaded with Beltrami County's exact design temperatures (-18°F winter / 84°F summer).
Enter your ZIP code to confirm it's in Beltrami County and get climate zone details.
Official ASHRAE design temperatures for Beltrami County, MN, used for accurate Manual J load calculations.
Minimum insulation and window requirements for Beltrami County per IECC 2021 energy code.
Climate Zone 7: Very Cold - Very cold climate with extreme winter conditions. Extreme heating requirements, minimal cooling needs.
1 cities and communities in Beltrami County share Climate Zone 7 requirements.
Compare climate zones with other counties in Minnesota. Different zones require different HVAC equipment sizing.
Upload your Beltrami County blueprint and get a professional Manual J load calculation using official Zone 7 design temperatures. First report is FREE.
Join 10,000+ Minnesota contractors who trust AutoHVAC